DIY Repair Kit for Kia Rio 3 Button Remote Car Key Fob Case RIO Logo 3 Micro Switches

Kia DIY Repair Kit 3 Button Remote Key Fob Case Shell with Rubber Buttons, Blade, Micro Switches and CR2032 Battery. With this Replacement Kia Car Key Casing you just swap your immobiliser chip and electronics over (Soldering on the micro switches and changing the battery if required), get the blade cut by a local Auto Locksmith and away you go.

Compatible with: Please note: it has the RIO Logo as the middle button but is compatible with other models as below.
Kia Rio, Ceed, Ceed Pro, Picanto, Sportage, Sorento & More, just compare your current Remote Key with the pictures above to ensure compatibility.

Instructions for use:
1. Open your existing key shell
2. remove the inside module (don’t forget the transponder or your car will not start)
3. Solder on the micro swicthes if required and change the battery
4. Move the remote module and transponder into the new key shell

Package contains:
1 x 3 button remote key fob casing with flip blade. RIO Logo
3 x High quality micro switches
1 x New CR2032 Battery

Please note:
This is an after market replacement case. Remote internals are NOT included, you can use your old remote internals so no programming is required.