Citroen DIY Repair Kit – Replacement 3 Button Remote Car Key Fob Case CE0523 with VA2 Flip Blade Micro Switches and CR1620 Battery

Citroen 3 Button Remote Flip Key Fob Case Shell including rubber buttons, 3 x Micro Switches and a New Battery. With this Replacement Car Key Casing you just put your immobiliser and electronics in, get the key cut to your cars profile and away you go.

This casing is the CE0523 model which means there in NO battery clip inside the casing. If the battery in your current key is attached to the green circuit board then this is the key casing for you.

Compatible with:
Citroen C1 C2 C3 C4 C5 C6 Grand Picasso Xsara Picasso Berlingo Dispatch and more, just compare your key with the picutres above.

Instructions for use:
1. Open your existing key shell
2. remove the inside module (don’t forget the transponder or your car will not start)
3. Move the remote module and transponder into the new key shell
4. Get the new key blade cut to fit your vehicle by your local locksmith (or use your own blade if possible)

Package contains:
1 x 3 button remote fob flip key casing
1 x Brand new uncut VA2 blade (please check the picture to ensure compatibility)
1 x Citoen logo sticker
3 x Tactile Micro Switches
1 x New Battery

Please note:
This is an after market replacement case. Remote internals are NOT included, you can use your old remote internals so no programming is required.

This casing has NO battery connection inside the casing, if your key has the battery on the remote board then this is the key casing for you.