Citroen DIY Repair kit 2 button Replacement Car Key Case Fob with VA2 Blade 2 x Micro Switches and CR2016 Battery

Citroen 2 Button Remote Key Fob Case Shell including rubber buttons, 2 x Micro Switches and a New Battery. With this Replacement Car Key Casing you just put your immobiliser and electronics in, get the key cut to your cars profile and away you go.

Compatible with:
Citroen 2 Button C1 C2 C3 C4 C5 C6 C8 Berlingo Dispatch Xsara Picasso and more, just compare your key with the pictures above.

Instructions for use:
1. Open your existing key shell
2. remove the inside module (don’t forget the transponder or your car will not start)
3. Move the remote module and transponder into the new key shell
4. Get the new key blade cut to fit your vehicle by your local locksmith (or use your own blade if possible)

Package contains:
1 x 2 button remote key fob casing
1 x Brand new uncut VA2 blade (please check the picture to ensure compatibility)
1 x Citroen logo
2 x Tactile Micro Switches
1 x New CR2016 Battery

Please note:
This is an after market replacement case. Remote internals are NOT included, you can use your old remote internals so no programming is required.

The Micro Switches Need to be Soldered into Place so Basic Soldering Skills are Required or You Could Ask a Local Electronics Repair Guy.